TECHNNICAL DATA
Precision:0.1-20μm
Filtration area:≥0.65㎡
Length:10"、20"、30"、40"
Outer diameter:Ø70mm
Connector:plane、222Plug-in、226Plug-in
Material:PP、PES、MO、PEFE、BQ、FH
Maximum differential pressure:25°C,at0.40Mpa
Pure water flux:0.2μm≥7L/min,0.45μm≥12L/min,0.65μm≥15L/min(△P0.01Mpa)
Complete test (minimum bubble point)(25℃;Pure water):0.2μm≥0.30Mpa,0.45μm≥0.22Mpa,0.65μm≥0.14Mpa
The folding filter element, the supporting layer, the end cover and the inner and the outer cylinder are polypropylene.
Welding:
With unique hot melt method, no adhesive, no foreign body fall off.
Typical use:
Can be used in the pharmaceutical industry, food industry, chemical industry, electronic industry.
Polypropylene filter element (PP)
Material: polypropylene filter media for polypropylene film.
The main characteristics: low pressure, high throughput, multiple times of washing, long life, high filtration precision, low cost of the special application of pre filter and clean filtration.
Poly (ether ether ketone) filter element: (PESU)
Material: poly ether ether ketone
Main characteristics:
Is a kind of hydrophilic and aseptic filter, with a total area of more than eighty percent of the membrane of the microporous rate and unique micro pore geometry. The adsorption of protein and microbial agent was lower than that of nylon membrane and cellulose acetate.
PTFE filter element: (PTFE)
Material: PTFE filter medium for PTFE membrane performance excellent wide applicability of chemical, biological safety and pyrogen control unique hydrophobic and hydrophilic two.
Hydrophobic: for gas filter to sterile, large flux, high temperature resistant, resistant to acid, alkali, chemical applicability wide, suitable for fermentation tank, carbon dioxide, nitrogen, compressed air. When used in gas filtration, can achieve more than 100% of all kinds of 0.02um trapped in the phage, bacteria and particles.
Hydrophilic: used for liquid filtration to sterile, chemical wide applicability, resistant to acid, alkali, ozone and high strength.
All of the above products have passed the 100% integrity test.